• Pdf Readers For Mac
• Free Adobe Reader For Mac
• Memory Card Reader For Mac
• Acrobat Reader Dc For Mac

The lack of an SD card slot on the 2016 and 2017 MacBook Pro is an inconvenience for photographers of all stripes who shoot with cameras other than the iPhone. The answer—as with everything else that needs to connect to the USB-C–only MacBook Pro—is an external USB-C SD card reader.

But which one? As you would expect, third parties have rushed to create adapters for everything, including memory card readers. And to no one’s surprise, the quality, specifications, and prices are all over the map.

We tested six adapters that stood out among the field based on online reviews, word of mouth, and design. All of the adapters read and write to SD cards, and we tested one model—the IOGEAR USB-C 3-Slot Card Reader/Writer—that also accepts larger CompactFlash (CF) cards still used by some high-end cameras. Choosing which reader is best for you depends a lot on what you need and how much you’re willing to spend. For most people, that could turn out to be one of the least expensive of the bunch.

Before you view the picks, you may want to consult our SD Card explainer to understand the stew of acronyms and jargon the industry uses to describe memory card storage and speed.

Best card reader for speed

The SanDisk Extreme Pro UHS-II USB-C Reader is pricey ($49 on Amazon, and unlike the other adapters we tested, it has just a single SD card slot—no microSD, CF, or USB-A ports to extend its versatility.

But it’s fast.

Mac Memory Reader is a simple command-line utility to capture the contents of physical RAM. Results are stored in a Mach-O binary or raw data file. Mac Memory Reader is available free of charge. Neoteck USB Card Reader 3 in 1 USB 3.0 Type C TF SD Memory Card Reader Micro USB Combo with OTG Function for Macbook Windows Computer Google Tablet Android Cell Phone-Grey USB 3.0 Card Reader, Fooxon Type C Micro SD Card Reader Compatible for Windows Mac and Vista. How to Use an SD Memory Card. In this Article: On Android On Windows On Mac Community Q&A This wikiHow teaches you how to transfer information to and from an SD memory card. You can use SD memory cards in things like digital cameras, phones, tablets, and most computers. Card Readers & Adapters; Navigate to Top Card Readers & Adapters SORT BY: Narrow By: clear all. Many of the readers are both Windows and Mac compatible. Some come with drivers pre-installed, while others are driver-free for ease of use. SuperSpeed memory card reader/writer transfers data between your tablet, laptop, Ultrabook, Chromebook. Upgrade the RAM and storage of nearly any Apple computer at MacSales.com. We also provide refurbished Macs, external storage, docks, accessories, and more! Buy memory & SSD upgrades designed for your Mac laptop or desktop. Find the right part with our compatibility tool, backed by our 45-day guarantee.

On one hand, the speed is due to its UHS-II compatibility, transferring up to a theoretical 312 MBps from UHS-II memory cards that include a second row of contacts from which to read data. In our real-world tests, we recorded an average throughput of 195.45 MBps for photos and 267.67 MBps for video; the latter’s increase is due to the reduced amount of overhead needed to copy nine files versus 684 files.

That said, even when copying from more common UHS-I cards, which top out at a theoretical speed of 104 MBps, the SanDisk Extreme Pro UHS-II USB-C Reader bested the other adapters we tested. It copied our suite of photos at a rate of 86.68 MBps and video at 101 MBps.

MOOS Project Viewer – just a viewer for Microsoft® Project. MOOS Project Viewer is a viewer for Microsoft® Project that allows you to open, view in a dynamic way and print any Microsoft® Project file. It is running on any Java enabled platform including Windows®, Mac OS X and Linux.There are many viewers for Microsoft® Project on the market, some freeware and others commercial. Ms project 2013 free download. Jul 12, 2014  Project Viewer 365 for Mac is compatible with Microsoft Project (MPP file format) 2016, 2013, 2010, 2007, 2003 and earlier versions. The interface is intuitive making Project Viewer. Seavus Project Viewer is one of the newest Microsoft Project viewers for Mac and opens.mpp files from Microsoft Project 2013 onwards including MS Project 2016. Seavus Project Viewers allows you to track your project plans using various resources such as Gantt Chart view, Task sheet view and Resource Sheet view. Free Microsoft Project Viewer v.3.1.4 Free MOOS Project Viewer is a free Microsoft Project viewer that can open any MS Project file type (.mpp,.mpt,.mpx,.xml) for any Microsoft Project version (2000, 2003, 2007, 2010).

We also liked the fairly compact design, with its bendy neck and minimal footprint, although the angle of the case where you insert the SD card makes extracting a card less elegant than needed.

But if you’re shooting with a camera that works with UHS-II cards and you need the fastest copy turnaround, the cost is worth it.

Best value for UHS-II cards

If you’re willing to give up a few seconds and don’t want to pay a premium for speed, the Verbatim USB-C Pocket Card Reader is nearly as fast as the SanDisk Extreme Pro when copying from UHS-II cards and costs just $17 on Amazon.

In our testing, we found an average throughput of 179.36 MBps for photos and 221.89 MBps when transferring video files. The Verbatim reader is a little more bulky, and sports a short cable for the USB-C plug, but it also features slots for SD and Micro SD cards.

Best combination of price and performance

What if, like most current photographers, you’re not yet capturing to UHS-II cards? For an adapter that has a great combination of price and performance, we like the Cable Matters USB 3.1 Type-C Dual Slot Card Reader ($12 on Amazon).

We expected to run into tradeoffs at this price, but the Cable Matters adapter was almost as fast as the SanDisk adapter. Our photos transferred at 82.17 MBps, while videos zipped along at 95.6 MBps.

The adapter has dedicated SD and microSD card slots that can be used simultaneously, and a discrete LED to indicate the adapter is getting power. With dimensions of just 2.8 x 5.4 x 0.5 inches and a 6-inch cable, it doesn’t add bulk to any bag.

If you don’t need UHS-II compatibility, the Cable Matters USB 3.1 Type-C Dual Slot Card Reader is the one to get.

How we tested

We copied two sets of photos and videos from a SanDisk Extreme Pro SDXC card rated at 95 megabytes per second (MBps). For photos, we timed three transfers of 12.9GB of JPEG and raw images (684 files) and averaged the results. For video transfer, we copied 31GB (9 files) from the same card.

We also copied the same files using a SanDisk Extreme Pro SDHC UHS-II card rated at 280 MBps to test the difference that UHS II compatibility affords. And for the CF reader, we used a SanDisk Extreme CF card rated at 120 MBps (UDMA 7) to copy 7.7GB of JPEGS (402 files), since that card’s capacity maxed out at 16GB.

All of the testing was done on a 2016 MacBook Pro with TouchBar equipped with a 2.7GHz Intel Core i7 processor, 16GB of RAM, and a 1TB SSD. We used the Image Capture utility to facilitate the transfer of photos, and copied the video files using the Finder.

Bottom line

If you really need the top speeds afforded by UHS-II cards and devices that read them, we recommend the SanDisk Extreme Pro UHS-II USB-C Reader. For everyone else, however, our favorite USB-C memory card reader is the Cable Matters USB 3.1 Type-C Dual Slot Card Reader. It’s fast, small, and inexpensive—the attributes you want so you can spend your time and money on capturing photos.

To read the full reviews of each product we tested, click the product name in the list below, and then click the “Read the full review” link that appears.

To identify your MacBook Pro model, use the information in How to identify MacBook Pro models.

Once you're sure which model you have, find it in the list below to go to the instructions for that model. Note: Apple notebooks not listed in this table have non-removable memory.

Applicable Models

The instructions provided below are for the following MacBook Pro (13-inch) models:

• MacBook Pro (13-inch, Mid 2012)
• MacBook Pro (13-inch, Late 2011)
• MacBook Pro (13-inch, Early 2011)
• MacBook Pro (13-inch, Mid 2010)
• MacBook Pro (13-inch, Mid 2009)

Memory specifications

Use the tables below to confirm the memory you're installing is compatible with your MacBook Pro.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the bottom case

1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
   
3. Touch a metal surface inside the computer to discharge any static electricity from your body.
   

Step 2: Remove existing memory (if present)

1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the levers outward again.
2. Hold the memory module by its notches and remove it from the slot.
3. Remove the other memory module.
   Important: Hold the memory modules by their edges, and do not touch the gold connectors.
   

Step 3: Install memory

1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
2. Tilt the card and push the memory into the slot.
3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
   Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable Models

The instructions provided below are for the following MacBook Pro 15-inch models:

• MacBook Pro (15-inch, Mid 2012)
• MacBook Pro (15-inch, Late 2011)
• MacBook Pro (15-inch, Early 2011)
• MacBook Pro (15-inch, Mid 2010)
• MacBook Pro (15-inch, 2.53GHz Mid 2009)
• MacBook Pro (15-inch, Mid 2009)

Memory specifications

Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the bottom case

1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
   
3. Touch a metal surface inside the computer to discharge any static electricity from your body.
   

Step 2: Remove existing memory (if present)

1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the levers outward again.
2. Hold the memory module by its notches and remove it from the slot.
3. Remove the other memory module.
   Important: Hold the memory modules by their edges, and do not touch the gold connectors.

Step 3: Install memory

1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
2. Tilt the card and push the memory into the slot.
3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable model

The instructions provided below are for the following MacBook Pro 15-inch models:

• MacBook Pro (15-inch, Late 2008)

Memory specifications

Please use the table below to confirm the memory being installed is compatible with your MacBook Pro.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the access door

1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, security lock, and any other cords connected to the MacBook Pro to prevent damaging the computer.
2. Turn over your MacBook Pro and locate the latch. Push down to release the latch and remove the access door that covers the battery and hard drive.
3. The latch must be in its released, open position to remove the access door.

Step 2: Remove the battery

With the latch still in its open position, gently pull up on the tab to remove the battery.

Step 3: Remove the bottom case

1. Remove the eight screws that secure the bottom case of your MacBook Pro, and then remove the bottom case.
   Important: Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place.
   
2. Touch a metal surface inside the computer to discharge any static electricity from your body.

Step 4: Remove existing memory (if present)

1. Push out the ejection levers on the sides of the memory module to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the ejection levers again.
2. Hold the memory module by the notches and remove it from the slot.
3. Remove the other memory module.
   Important: Hold the memory modules by their edges; do not touch the gold connectors.
   

Step 5: Install memory

1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
2. Tilt the card and push the memory into the slot.
3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
4. Repeat, if necessary, to install an additional memory module in the top slot. Press down on the module to make sure it is level.
   Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.
   

Step 6: Replace the bottom case

Replace the bottom case. Replace and tighten the eight screws.

Step 7: Replace the battery

To replace the battery, make sure the latch is in its open position. Hold the battery at an angle and slide the lipped edge of the battery below the brackets on the outside edge of the battery bay. Gently press the battery down.

Step 8: Replace the access door

With the latch in the open position replace the access door, making sure it is level with the bottom case of your MacBook Pro, and press the latch into the closed position.

Applicable models

The instructions provided below are for the following MacBook Pro 17-inch models:

• MacBook Pro (17-inch, Late 2011)
• MacBook Pro (17-inch, Early 2011)
• MacBook Pro (17-inch, Mid 2010)
• MacBook Pro (17-inch, Mid 2009)
• MacBook Pro (17-inch, Early 2009)

Memory specifications

Use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

Removing or installing memory

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the bottom case

1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
2. Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
   
3. Touch a metal surface inside the computer to discharge any static electricity from your body.
   

Step 2: Remove existing memory (if present)

1. Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you can't find the notches, try pressing the levers outward again.
2. Hold the memory module by its notches and remove it from the slot.
3. Remove the other memory module.
   Important: Hold the memory modules by their edges; do not touch the gold connectors.
   

Step 3: Install memory

1. Align the notch on the gold edge of the module with the notch in the lower memory slot.
2. Tilt the card and push the memory into the slot.
3. Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
4. Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
   Note: Make sure your memory is installed according to the illustration below, with the gold contacts inserted almost completely into the connector.

Step 4: Replace the bottom case

Replace the bottom case. Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.

Applicable models

The instructions provided below are for the following MacBook Pro 15-inch and 17-inch models:

• MacBook Pro (17-inch, Late 2008) and earlier
• MacBook Pro (15-inch, Early 2008) and earlier

Memory specifications

Pdf Readers For Mac

Please use the tables below to confirm the memory being installed is compatible with your MacBook Pro.

Refer to this table for the maximum amount of memory that can be recognized by these notebook computers:

Removing or installing memory

You will need to remove the battery before installing additional memory and reinstall the battery after installing the memory. The following procedure includes all the necessary instructions for both parts of the process.

Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.

Step 1: Remove the battery

1. Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, and any other cords connected to the MacBook Pro to prevent damaging the computer.
2. Turn the computer over.
3. Locate the battery release latches on each side of the battery.
4. Slide both latches up. The battery should pop up slightly.
5. Lift the battery out.
   

Step 2: Remove the memory door

1. Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the battery bay of your computer. Depending on the model of your MacBook Pro, you may have three or four screws.
   
2. Touch a metal surface inside the computer to discharge any static electricity from your body.
   

Step 3: Remove existing memory (if present)

If you need to remove a memory card—for example if you are replacing it or if you need to get past the memory in the top slot to access the bottom slot—you can remove the card by spreading the tabs on each side of the card away from the notches in the memory card. The card should pop up slightly. Lift the memory card to about a 25-degree angle and then gently slide the card out of the memory slot.
Important: Hold the memory modules by their edges; do not touch the gold connectors.

Step 4: Install memory

1. Insert the new memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Firmly press the memory card into the memory slot. You might feel some resistance.
2. Gently spread the small tabs in the memory slot away from the notches and push the memory card down until the two tabs on either side of the card lock into place.
3. Insert any additional memory into the second slot.
   Note: Make sure you install the memory according to the illustration below, with the gold contacts inserted almost completely into the connector.
   

Step 5: Replace the memory door

Replace the memory door, and make sure the door is lying flat before you screw it back into place.

Step 6: To insert the battery

1. Place the bottom edge of the battery into the battery compartment at an angle, as shown below.
2. Gently press the top edge of the battery down until the battery latch locks into place.
   

Learn more

Checking that your computer recognizes the new memory

After installing additional memory, you should confirm that the computer recognizes the new memory. To check the computer’s memory:

Free Adobe Reader For Mac

1. Start up your computer.
2. When you see the Mac OS X desktop, choose the Apple () menu from the upper-left menu bar, then choose About This Mac.

Memory Card Reader For Mac

The total memory includes the amount of memory that originally came with the computer plus the new memory you added, or if all the memory has been replaced, the new total for that memory. For detailed information about the amount of memory installed in your computer, open System Profiler by choosing Apple () and then About This Mac. Then, click More Info and then Memory from the Hardware section that appears in System Profiler.

Acrobat Reader Dc For Mac

If your computer doesn’t recognize the memory or doesn’t start up correctly, confirm that the memory you installed is compatible with your MacBook Pro and that it is installed correctly by reseating the memory.